I have struggled on long enough now without a
Shavehorse but
enough is enough, time to make one. First job is to split out a large log for the bench of the horse. I suspect mine will have to spend most of its time outdoors , so I have elected to use Oak with its high
Tanin content. I enjoy using hand tools as much as possible so I crosscut a 6ft log with a handsaw, split it with wedges and a mallet, and flattened the top surface roughly with an old British Rail
Adze I was given.
I am interested in texture in my
woodworking so took the opportunity to experiment with Knives, an
Adze and Gouges whilst smoothing out the surface. Working at dusk on a nice sunny evening is great with the low light for showing up any imperfections.
Next job is to source some suitable material for the legs. Again I will be using either Oak or Chestnut for durability. The leg tenons will be 1 1/2". There are many patterns of
shavehorse, dependant on the primary function it will be put to. I intend to make something similar to this one I used recently on a course with Owen Jones- the
cumbrian Swill maker
I am interested in texture in my woodworking so took the opportunity to experiment with Knives, an Adze and Gouges whilst smoothing out the surface. Working at dusk on a nice sunny evening is great with the low light for showing up any imperfections.
Next job is to source some suitable material for the legs. Again I will be using either Oak or Chestnut for durability. The leg tenons will be 1 1/2". There are many patterns of shavehorse, dependant on the primary function it will be put to. I intend to make something similar to this one I used recently on a course with Owen Jones- the cumbrian Swill maker
