Friday 25 February 2011

Wooden 'Pots'.

As I promised in an earlier post I thought I'd show how I make wooden vessels:- a take on Shrink pots I guess but using Sirewood found on the forest floor. Here I'm using some gnarly, knobbly Elm I thought looked interesting.


















In this case the pith and central heartwood had rotted away, otherwise I would have drilled a central escape hole with a forstner bit. Pretty straight forward really, enlarge the hole using gouges and a mallet, followed by a spoon knife to smooth the inner surface and get the walls to about 3/8" to 1/2" thickness.






I then mark out for a rebate which will take the base and a leather fixing gasket.




Then remove about 1/4" material with a carving knife to form the rebate : this is the most tedious step.











I use 'Saral' to mark the inner profile of the bottom of the vessel onto some thin timber to make a base.






Here the base has been cut out and fitted. It is pushed up snugly against the rebate and fixed in position by a thick leather thong and some copper tacks.
Base completed. Lids can be made and fitted in a similar manner, marking out with Saral.


More pots

Easy peasy. Cheers John